To Access Programs; To Access Presets; Mapping A Preset To A Program; Front Panel - Mesa/Boogie TriAxis Owner's Manual

FRONT PANEL:

(Continued)
TO ACCESS PROGRAMS (via the numeric keys):
COPY
ENTR
PRESET PROGRAM/CHANNEL
TO ACCESS PRESETS (via the numeric keys):
COPY
ENTR
PRESET PROGRAM/CHANNEL

MAPPING A PRESET TO A PROGRAM:

PRESET
COPY
NUMBER
ENTR
PRESET PROGRAM/CHANNEL
EXIT
under the Program Location number using the left & right arrowed keys directly under the PRESET window. Now you should see the
PRESET you wish to map in the PRESET window and the Program Number you wish to write this PRESET under, in the PROGRAM
/ CHANNEL window.
3. Press the ENTR key two times. Procedure is now complete.
FLASH
GAIN
PGM
/CH
0
FLASH
GAIN
PGM
/CH
0
First understand that PRESETS are "SOUNDS" and that PROGRAMS are "Midi
PROGRAM
NUMBER
GAIN
PGM
/CH
0
1. Press the SHIFT key one time to access the programs.
2. Select PROGRAM using nu-
meric keys located below GAIN,
TREBLE, MIDDLE, BASS, and
LEAD DRIVE windows.
TREBLE
3. Press the ENTR key one time
1 2 3
to access new PROGRAM number
and audition the PRESET listed at
that location.
1. Press the SHIFT key two times to make PRESET the active window,
then select the new PRESET using the numeric keys once
again.
2. Press the ENTR key one time to lis-
ten to the displayed flashing PRESET.
TREBLE
3. Press the ENTR key two times to
1 2 3
write displayed flashing PRESET to
displayed PROGRAM number.
PROGRAM LOCATIONS."
1. Call up the PROGRAM LOCATION number that you
wish to write using the left & right arrowed keys directly
under the PROGRAM / CHANNEL window, a Midi Control-
TREBLE
ler, or by using the numeric keys located directly under
the GAIN thru LEAD 1 DRIVE keys.
1 2 3
2. Choose the desired PRESET "sound" you wish to list
PAGE 2
SHIFT
M B
ESA OOGIE
ALL TUBE PREAMPLIFIER
SHIFT
B
M
ESA OOGIE
ALL TUBE PREAMPLIFIER