Log Message Descriptions; Table 79 System Error Logs; Table 80 System Maintenance Logs - ZyXEL Communications MAX-206M1R series User Manual

Table 78 TOOLS > Logs > Log Settings
LABEL
Apply
Cancel

18.4 Log Message Descriptions

The following tables provide descriptions of example log messages.

Table 79 System Error Logs

LOG MESSAGE
WAN connection is down.
%s exceeds the max.
number of session per
host!

Table 80 System Maintenance Logs

LOG MESSAGE
Time calibration is
successful
Time calibration failed
WAN interface gets IP: %s
DHCP client gets %s
DHCP client IP expired
DHCP server assigns %s
Successful WEB login
WEB login failed
TELNET Login Successfully
TELNET Login Fail
Successful FTP login
FTP login failed
NAT Session Table is Full!
Time initialized by Daytime
Server
User's Guide
DESCRIPTION
Click to save your changes.
Click to return to the previous screen without saving your changes.
DESCRIPTION
The WAN connection is down. You cannot access the
network through this interface.
This attempt to create a NAT session exceeds the
maximum number of NAT session table entries allowed to
be created per host.
DESCRIPTION
The device has adjusted its time based on information
from the time server.
The device failed to get information from the time
server.
The WAN interface got a new IP address from the
DHCP or PPPoE server.
A DHCP client got a new IP address from the DHCP
server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the device's web
configurator interface.
Someone has failed to log on to the device's web
configurator interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the device via ftp.
Someone has failed to log on to the device via ftp.
The maximum number of NAT session table entries
has been exceeded and the table is full.
The device got the time and date from the Daytime
server.
Chapter 18 The Logs Screens
205