Linksys EFG120 User Manual page 26

10. From the Add Printer Wizard screen, shown in Figure C-8, select your
printer's manufacturer from the list on the left. Then, select your printer's
model from the list on the right. Once you've selected your printer, click
the OK button.
11. This final installation screen, shown in Figure C-9, will allow you to
review your choices before finishing the installation process. Verify that
all of the settings are correct before clicking the Finish button. If anything
is not correct, click the Back button to correct the settings.
44
Figure C-8
Figure C-9
12. Clicking the Finish button on the previous screen will return you to the
Printers folder. This folder will show all printers available on the network,
as shown in Figure C-10. Your new printer should be shown here.
If you wish to change any settings, right-click the printer's icon and select
Properties. You will be asked if you want to install the driver, but since
you have already installed the drivers on this PC, click the No button. The
Properties window will then open, and you can change the printer's set-
tings.
Figure C-10
45