Linksys EFG120 User Manual page 23

5. Attach the power cable from the drive tray to
your hard drive, as shown in Figure B-2. The
power cable is the smaller of the two cables
in the drive tray. Be sure to plug this secure-
ly into your hard drive.
6. Review the connections. It should
look like the image in Figure B-3.
You will want to make sure these
connections are tight before securing
the drive to the tray.
7. Insert a screw through the
tray's left side, as shown in
Figure B-4, and into your
drive. Tighten it to secure
the drive to the tray on the
left.
38
Figure B-2
Figure B-3
Figure B-4
8. Insert a screw through the tray's left
side, as shown in Figure B-5, and into
your drive. To tighten it and secure
the drive to the tray on the right, you
will need a narrow screwdriver to fit
through the hole as shown.
9. Slide the drive into the second drive bay.
10. Lock the tray into the EFG120's bay. The tray must be locked in for the
EFG120 to properly function.
Figure B-5
39