Linksys EFG120 User Manual page 25

5. Click the Add Printer icon, shown
in Figure C-3. This will open the
Add Printer Wizard.
6. When the opening screen to
the Add Printer Wizard
appears, shown in Figure C-4,
click the Next button to con-
tinue.
7. As you are adding this print-
er to your network, select
the Network Printer option
on this screen, as shown in
Figure C-5, and click the
Next button to continue.
42
Figure C-3
Figure C-4
Figure C-5
8. The next screen will request how the printer will be located by the
EFG120. Select Type the Printer name, or click Next to browse for a
printer. Then, in the field below, enter this location in the following for-
mat: \\Lkg(last six digits of the server name located on the back of the
EFG120)\Lkg(last six digits of the server name located on the back of
the EFG120)_p1. This is the format used by default to locate the printer.
In the example shown in Figure C-6, the last six digits of the server name
are 0F0016. Therefore, the information entered is: \\Lkg0F0016\
Lkg0F0016_p1.
After you have entered this information, click the Next button.
9. The next screen, shown in Figure C-7, will ask you to install a printer driv-
er. Click the OK button to do this now.
Figure C-6
Figure C-7
43