Linksys EFG120 User Manual page 16

Properties Enter the user's name in the Name field. Punctuation and other
special characters (e.g. * / | \ ) cannot be used in the name. In
the optional Comment field, you can enter a comment if you
wish. In the Password and Verify Password fields, enter the
user's password. These fields are also used to change an exist-
ing user's password, as follows:
Select the desired user. Clear the existing values in the pass-
word fields. Enter the desired password in both the Password
and Verify Password fields. If no password is required, leave
both fields blank. Click the Save button. When creating a new
user, enter the desired password in both of these fields. Check
the Create matching Group and Share Folder (Private
Folder) to create a Group and a Share with the same name as
the user when creating a new user. This field allows you to
choose which disk is used for the Share. Read/Write access
will be granted to the Share. The Users screen on the Setup
24
Figure 5-10
menu ALWAYS performs these functions. Check the Enable
Disk Quota of box if you want to set the disk usage limit for
the user. Enter the maximum amount of disk space the user is
allowed to use. Click the Clear Form button to clear the form
for the entry of a new user. Click Save as new User to create a
new user, after entering their data in the Properties fields.
Click the Save button to save any changes you have made to the
properties for an existing user. To modify the properties for an
existing user, select the desired user from the list. Their details
will be displayed in the Properties fields. Edit the fields as
required. Note that you cannot change the Create matching
Group and Share Folder option when modifying a user.
However, you can use the Share (Private Folder) Location field
to change the location of a user's Private Folder, if it already
exists. Click the Save button to save your changes.
25