Table of Contents
Advertisement
www.linksprite.com
SubnetGate
Its length is 4 bytes. It defines the subnet gate IP address of the network which the
WLAN module is in, and its format is as above. It needs to note that, according to the
specific SubnetMask value, the valid data filed length of SubnetGate is different and
others are ignored. For example,
SubnetMask
1
＝
SubnetGate[0]
＝
SubnetGate[1]
＝
SubnetGate[2]
＝
SubnetGate[3]
＝
Then, only SubnetGate[3] is in use, others are ignored.
SerIpAddr
Its length is 4 bytes. It defines the IP address of data center server. The format is same
as
StaIpAddr.
SerMacAddr
Its length is 6 bytes. It defines the MAC address of data center server(only used in RAW
format).
4.5. Programming Guide
4.5.1. Examples of Network Control
Example 1: Scan the network whose channel numbers are 1
Create the following command, where the highlighted blue part is to scan (00) the specified
channels, 31=channels 1
The returned message,
，
1 92
1 68
1
1
5
6 , 04=channel 11.
、
、
、
45 / 50
5
、
6
、
1 1
Advertisement
Table of Contents
