www.linksprite.com
3. Testing Guide
WLAN cannot work properly until it is embedded in a system.
simulation environment for users to do the functional testing of the module.
3.1. Summary
All the testing environments consist of the following devices:
Tester 1
It is used to run the client software of WLAN module, and communicates with WLAN module
through the computer serial port. The functions include:
1
Send command to control the WLAN module
、
2
Receive and analyze the message sent by the WLAN module
、
3
、
Set or inquire the configuration parameters of WLAN module;
4
Work with server software to run data transmission testing
、
WLAN module
It consists of the STAU network card that supports UART serial port. The functions include:
1
Wireless connection
、
2
、
Data transmission between serial port and wireless network
AP
It's used to build a wireless network.
Tester 2
;
;
;
;
16 / 50
We support the following
;