www.linksprite.com
The server software runs on the computer with a WLAN connection. When the computer and
the WLAN module both connect to a network defined by an AP, the server software can do the
data transmission testing with the client software.
UDP Testing
First set up a UDP server and set the Link Layer data format of WLAN module to UDP. Then
data communication can be established, including sending and receiving text, receiving
document. In this mode, the server does not support sending document.
TCP Testing
First set up a TCP server and set the Link Layer data format of WLAN module to TCP. Then
data communication can be established, including sending and receiving text.
Online Update
The server works as the online update server, enables the remote firmware update for the
WLAN module.
3.4. Parameter Management
3.4.1. Parameter Query/Edit
The client software can be used to manage the parameters of the WLAN module. The following
example demonstrates how to modify the encryption method.
19 / 50