Table of Contents
Advertisement
www.linksprite.com
FLG
0 x47
：
RES
N o defined
：
4.4. Configuration parameters
WLAN module's configuration parameters are defined as follows.
4.4.1. System parameters
Baud rate
Its length is 1 byte. It defines the baud rate of the UART serial port in bps,
0
19200
1
3 8400
－
，
－
Auto Connect
Its length is 1 byte. It defines the connection mode of the WLAN module, 0
automatic.
Transparent
Its length is 1 byte. It defines the transparent transmission mode, 0
mode is only valid in automatic connection mode and UDP data format
TCP Server Mode
Its length is 1 byte. It defines the TCP monitor mode, 0
valid in TCP data format).
4.4.2. Network parameters
This module supports up to 7 groups of network parameters, so there are 7 network parameter
configurations, whose indexes are 1~7. Each group of parameters includes:
BSSID
Its length is 6 bytes. It defines BSSID of the target network. Its value is the MAC address of the
AP used by the target network.
Channel
Its length is 1 byte. It defines the channel of the target network, its valid value range is 1~14.
2
5 7600
3
1 15200
，
－
，
－
c lose,1
－
43 / 50
－
manual
close,1
e nable
－
－
.
）
e nable (this mode is only
－
，
1
－
t his
（
Advertisement
Table of Contents
