Hyundai Accent Owner's Manual page 43

4 - 22
FEATURES OF YOUR VEHICLE
B230B01E-AAT
Using a Child Restraint System
Attachment Bolt (5/16"-30 mm)
Washer, Conical Spring
Holder, Child Restraint Hook
Spacer (4Door : 6mm or
3/5Door : 10mm),
Child Restraint Hook Holder
Retainer Washer
For small children and babies, the use
of a child seat or infant seat is required.
This child seat or infant seat should be
of appropriate size for the child and
should be installed in accordance with
the manufacturer's instructions. It is
further required that the seat be placed
in the vehicle's rear seat since this can
make an important contribution to
safety. Your vehicle is provided with
three child restraint hook holders for
installing the child seat or infant seat.
B230C04A-DAT
INSTALLING A CHILD RE-
STRAINT SEAT
Three Child Restraint Anchorage Fit-
ting Packages are located on the rear
seat package tray.
B230B01TB
Tether Anchor
Cover
1. Open the tether anchor cover on the
rear seat package tray.
Child Restraint
Anchorage Fitting
Package
B230C01A
2. Route the child restraint seat strap
Child Restraint Anchorage
Fitting Packages
Attaching Clip
Front of Vehicle
over the back of the seat.
For vehicles with adjustable head-
rests, route the tether strap under
the headrest and between the head-
rest posts, otherwise route the tether
strap over the top of the seatback.
B230C02A-E