Spare Tyre - Hyundai Accent Owner's Manual

!
CAUTION:
Serious loss of coolant indicates
there is a leak in the cooling system
and this should be checked as soon
as possible by a Hyundai dealer.
D040A01A-DAT

SPARE TYRE

For Full Size
The following instructions for the FULL
SIZE spare tyre should be observed:
Check inflation pressure as soon as
practical after installing the spare tyre,
and adjust to the specified pressure.
The tyre pressure should be periodi-
cally checked and maintained at the
specified pressure while the tyre is
stored.
Spare Tyre Pressure
Tyre Size
Full Size
Inflation Pressure
207 kPa (30 psi)
D040B01A-DAT
Handling the Spare Tyre
Release the securing bolt to remove
the spare tyre. To install the spare tyre,
tighten the bolt firmly with your fingers
until the spare tyre is secured.
WHAT TO DO IN AN EMERGENCY
D060K01FC-DAT
Wheel Cap (If Installed)
Groove
HLC4011
1. Wrap a piece of cloth around the tip
of the screwdriver to avoid scratch-
ing.
2. Insert a screwdriver into the groove
of the wheel cap and pry gently to
remove the wheel cap.
3. Change the flat tyre.
6- 5
HLC4009