Placing Calls
Place an Outside Call <Quick Access>
Trunk Key
Listen for Dial Tone before dialing a Telephone Number.
You can have function keys for Trunks or Trunk Groups. Ask your NEC Authorized Supplier.
Place an Outside Call <Access by Code>
Speaker
To change Trunk Access Code, Ask your NEC Authorized Supplier for details.
Listen for Dial Tone before dialing a Telephone Number.
In case the number of Trunk Group is more than 10, you should enter 2 digits (e.g. 11 : Group 11) after
dialing "804". Ask your NEC Authorized Supplier for more details.
For the dial digit of Trunk Number, Ask your NEC Authorized Supplier for details.
Place an Intercom Call <Dial Access>
Speaker
Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin
speaking. Dialing "1" changes voice/ring mode. (in case the destination is Multi-line Telephone)
Telephone Number
?
?
?
?
Trunk Access Code
9
Trunk Group No.
8
0
4
Trunk No. (e.g. Trunk 5)
#
9
0
Extension Number
?
?
?
?
?
5
- 5 -
Telephone Number
?
?
?
?