1.
With the handset on-hook, press a line key, the speakerphone key, or NewCall soft
key on the screen to obtain dial tone.
2.
Dial the desired number
Placing a Call Using the Headset:
1.
With the optional headset connected, press a line key, headset key, or NewCall soft
key on the screen to obtain dial tone.
2.
Dial the desired number
Users also have the option to dial directly from the dial pad without first getting dial
tone. Simply enter the number then lift the handset or press the Dial soft key or press
the headset or speakerphone keys. In all cases, the active call will appear on the display
showing call duration and destination.
Answering a Call Using the Handset:
Pick up the handset.
Answering a Call Using Hands-Free Speakerphone Mode:
Press the speakerphone key or with the handset on hook or press the line key
opposite the incoming call, or the Answer soft key.
Answering a Call Using the Headset:
Pressing the headset key will answer the call through an optionally connected
headset. If headset memory mode is enabled, pressing the line key will do the same.
In all cases, the active call will appear on the display showing call duration and
destination.
New Call Soft Key
The New Call soft key performs the same function as lifting your handset or pressing a
line button. When pressed the telephone goes off-hook and plays dial tone. Follow the
instructions above under Placing a Call.
Forward Soft Key
The Forward soft key enables call forwarding for your extension:
1.
press Forward soft key
2.
enter a valid extension or telephone number after Contact:
3.
press the 1/A/a soft key to rotate between numerical, capital alpha, lower case alpha
mode
4. press the Enable
The icon next to each line button will change to indicate that forwarding is enabled.
Press the Forward soft key again and press the Disable soft key to disable call
forwarding.
MyStat Soft Key
The MyStat soft key allows you to change the status of your extension so that other
extensions (Buddies) that are watching your status will display your preferred status.
11
Need help?
Do you have a question about the SoundPoint IP601 and is the answer not in the manual?