Table of Contents
Advertisement
Computer Input
Direct Operation
Choose Computer 2 (RGB) by press the COMPUTER 2
button on the remote control or press the INPUT button on
the top control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Top Control
INPUT button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point ▲
to Input and then press the Point
button.
2
Use the Point ▲
then press the SELECT button.
When Computer 2 is selected, analog RGB input
source will be selected directly.
Note:
When the Input Search function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.45).
28
Input Source Selection (Computer 2: RGB)
Computer 1
Computer 2 *
HDMI
Video
S-video
buttons, move the highlight
▼
or the SELECT
►
buttons to select Computer 2 and
▼
Remote Control
HDMI
COMPUTER 2 button
Computer 2 (RGB)
COMPUTER 2 can not be selected when using
*
ASPECT
the COMPUTER IN 2/ MONITOR OUT terminal
as MONITOR OUT output.
Input Menu
*
Advertisement
Table of Contents
