Table of Contents
Advertisement
Video Input
Direct Operation
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Colorboard,
Image 1, Image 2, Image , and Image 4 by pressing the
IMAGE button on the remote control.
Menu Operation
1
Press the MENU button to display the On-Screen Menu.
Use the Point ▲▼ buttons to select Image select and
then press the Point ► or the SELECT button.
2
Use the Point
▲▼
and then press the SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
Press the Point
button at Colorboard, and then use the
►
Point
buttons to switch the desired item (Red, Blue,
▲▼
Yellow, Green) and then press the SELECT button.
At the time of simple projection on the colored wall, you can
get the close color image to the color image projected on a
white screen by selecting the similar color to the wall color
from the preset four colors.
Image 1-4
For viewing with the user preset image mode in the Image
adjust Menu (see pages 41-42).
40
Image Mode Selection
buttons to select the desired item
HDMI
Remote Control
ASPECT
IMAGE button
Image select Menu
IMAGE button
Dynamic
Standard
Cinema
Blackboard (Green)
Colorboard
Image 1
Image 2
Image
Image 4
Advertisement
Table of Contents
