Control Functions; Control Panel - Jacuzzi J - 315 Owner's Manual

9.0

Control Functions

9.1

Control Panel

A. LED Display: Can
display current water
temperature (default
display), water
temperature set point,
selected filtration/
heating mode, and error
messages.
B. Warmer (
C. Cooler ( ) Button: Decreases water temperature set point.
D. Light On/Off
lighted cup holders and backlit pillows on in unison. Press once for
high intensity; press a second time for medium intensity; press a third
time for low intensity; press a fourth time to turn off. The displayed
color is changed using the light mode button (E) below.
E. Light Mode
footwell, cup holders, and pillow lights. See page 26 for additional
information.
F. Jets 1 Button: Turns jets pump #1 on and off. Press once for low-
speed; press a second time for high-speed; press a third time to turn
pump off.
G. Jets 2 Button (J-335 to J-375): Turns high-speed jets pump #2 on
and off. Press once to turn pump #2 on; press a second time to turn
pump #2 off.
H. Heat Indicator: Lit when heater is on.
Operation Details
• Temperature Adjustment: 65 to 104°F (18 to 40°C). Factory default
setting is 100°F (38°C).
• Light Operation: All LED lights run for 2 hours, then automatically
shut off.
• Jets 1/Jets 2 Button Operation: Jets run for 20 minutes when
activated, then turn off automatically to conserve energy. Simply
press either jets button to continue operation for an additional 20
minutes.
) Button: Increases water temperature set point.
Button Options: Turns waterfall, footwell light,
Button: Selects one of 4 color modes for waterfall,
A
B
C
D
2-Pump Control Panel Shown
J-300
H
G
F
E
23