Activate Jet Pumps; Light On/Off Button; Light Mode Button; Jets - Jacuzzi J - 315 Owner's Manual

J-300
10.2

Activate Jet Pumps

The control panel JETS 1 button activates jets pump 1. The
first press activates low speed, the second press activates
high speed, and the third press shuts jets pump 1 off. The
JETS 2 button activates jets pump 2. The first press activates
high speed, the second press turns jets pump 2 off. When manually
activated, either pump will automatically turn off after 20 minutes.
10.3

Light On/Off Button

Pressing this button activates the waterfall, footwell light,
lighted cup holders, and backlit pillows lights in unison as
follows: high - medium - low - off.
Note: Lights automatically turn off after 2 hours.
10.4

Light Mode Button

This button offers 4 light modes for your enjoyment. Press this
button to select your favorite lighting effect as follows:
Press
Once
Press
Again
Press
Again
BLUE (X4) VIOLET (X5) RED (X6)
Press
Again
10.5

Jets

The water flow through individual jets in your spa can be
adjusted or turned off by rotating the outside jet ring. Some jets
offer an adjustable center nozzle that allows you to change the
water discharge angle. Simply tilt the center nozzle in these jets
to the desired angle to customize your personal massage. Other
jets offer a spiral action that produces a surging stream of air and
water that provides a vigorous massage.
Note: Always keep at least 6 adjustable jets open at all times to ensure
proper filtration characteristics within the spa. Jets may not spin with jets
pump 1 running in low speed.
26
High-Speed Color Blend Mode
Low-Speed Color Blend Mode
Freeze Color Blend Mode:
Selects or "freezes" your low speed blending color of choice.
Solid Color Mode:
Selects one of 7 solid (high-intensity) colors of choice.
AMBER (X7) GREEN (X8) AQUA (X9) NEAR
WHITE (X10)