Table of Contents
Advertisement
COMPUTER MODE
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.
2
Press POINT DOWN button and move a red frame pointer to the
function that you want to select and then press SELECT button.
Normal
Provides image to fit the vertical size of the screen.
Full
Provides image to fit the horizontal size of the screen.
True
Provides image in its original size. When the original image size is
larger than screen size (1366 x 768), this projector enters Digital
Zoom mode automatically. Image size can be set to Normal by
pressing NORMAL button.
Digital Zoom
Adjusts image size or pans image. In "Digital Zoom" mode, the ON-
SCREEN MENU disappears and the magnifying glass icon and the
message "D. Zoom" is displayed.
This projector also enters Digital Zoom mode by pressing the
D.ZOOM
/
button on Remote Control Unit.
Refer to the following for operation.
Expand function
To expand the image size, press the D.ZOOM
SELECT button. The image is magnified by degrees.
Compress function
To compress the image size, press the D.ZOOM
size of image is reduced by degrees.
Panning function
To pan the image, press the POINT UP/DOWN/LEFT/RIGHT
buttons. Panning function can work only when the image is larger
than the screen size.
To return to screen size previously set, press NORMAL button.
To cancel Digital Zoom mode, press any button except D.ZOOM
/ , SELECT, POINT, NORMAL or AUTO PC ADJ. button.
30
PICTURE SCREEN ADJUSTMENT
SCREEN MENU
Move the red frame to the function and
press SELECT button.
NOTE
This SCREEN Menu cannot be operated when
"HDTV720p," "HDTV1035i" or "HDTV1080i" is
selected on SYSTEM Menu (P23, 24).
True and Digital Zoom cannot be selected when
"RGB" is selected on SYSTEM Menu (P23, 24).
This projector cannot display any resolution higher
than 1280 X 1024. If your computer's screen
resolution is higher than 1280 X 1024, reset the
resolution to the lower before connecting projector.
The image data in other than XGA (1024 x 768) is
modified to fit the screen size in the initial mode.
Panning function may not operate properly if the
computer system prepared on PC ADJUST Menu
is used.
button or the
button. The
SCREEN Menu icon
Advertisement
Table of Contents
