AUVIO 4000334 User Manual

AUVIO 4000334 User Manual

40 w 2-way 5.25" in-ceiling speaker

Advertisement

Quick Links

®
T H E PE RF ORMANCE YOU NE ED
TM
40 W 2-Way
5.25'' In-Ceiling Speaker
Please read this user's guide before using your new
speaker.
User's Guide
4000334

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4000334 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AUVIO 4000334

  • Page 1 ® T H E PE RF ORMANCE YOU NE ED 40 W 2-Way 5.25’’ In-Ceiling Speaker Please read this user’s guide before using your new speaker. User’s Guide 4000334...
  • Page 2: Package Contents

    Package Contents Speaker User’s Guide „ „ Template/Paint mask „ Features Mounts flush inside your ceiling for a sleek appearance „ Two-way acoustic design provides great audio quality „ from both ends of the sound spectrum Spring-loaded terminals work with any standard „...
  • Page 3 has at least a 3 inch (76 mm) clearance behind the „ mounting surface. Avoid wall studs or other objects that might block the back of the speaker. Remove the inner cardboard disc from the supplied template/paint mask and keep it for later. Use the outer portion of the mask as a template to mark the cutout hole size and location for mounting the...
  • Page 4 Connect Speaker Wires Connect the speaker to your amplifier outputs, using wire that is color-coded or otherwise marked to help connect the wires correctly. Turn off the amplifier and all associated equipment. Route the speaker wire from the amplifier to the speaker. Separate about 2 inches (50 mm) Strip insulation of speaker wire at each end.
  • Page 5: Mount The Speaker

    Notes: Make sure that the polarities and impedance of the speaker and amplifier match. Avoid routing the speaker wire near electrical wires. Do not nail, staple, or otherwise puncture the speaker wire. Use a speaker wire no thicker than 14 gauge A.W.G. and no longer than 30 ft to avoid signal loss in the cable.
  • Page 6: Specifications

    Maintenance To avoid damaging the speaker, turn down the volume „ of your amplifier before turning it on. Do not use overrating power, which can damage sound „ quality and loudspeaker drivers. Clean your speaker with a soft cloth. „ This speaker is not magnetically shielded.
  • Page 7 removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser. Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof of purchase date to the place of purchase in the U.S.
  • Page 8 RoHS environmental restrictions. © 2010. Ignition L. P . All rights reserved. Auvio is a registered trademark used by Ignition L.P . Package and insert are recyclable. Insert contains recycled material. Printed 09A10...

Table of Contents