Zephyr Milano Island ZML-M90AG Use, Care And Installation Manual page 14

1. Blower On/Off
By pressing the blower is switched on and off. When switched on, the blower starts up on speed level 3.
2. Speed Selection
The 6 speed levels are selected by pressing
selected.
3. Delay Off
This feature is used for programmed shut down of the blowers 15 minutes after the function is activated. Press
dot flashes in the lower right side of display
minutes.
4. Lights On/Dim/Off
Switch lights on by pressing
5. Display Window
The display window indicates speed levels and features such as metal filter clean reminder, delay off and charcoal filter change
reminder.
Metal Filter Clean Reminder (metal mesh filter)
After every 30 hours of use the display will start flashing an
possible clogs.
The standard metal mesh filters are required to be cleaned frequently and as recommended in order to maintain blower
efficiency. If improperly maintained, residue from cooking will sift through filters and cause damage to hood blowers and
other sensitive components; and possible clog duct work and create a fire hazard.
Blower On/Off
Display (speed level, delay off, filter clean/change)
Adjust 6 Speed Levels
to decrease and
indicating the function is on. The blowers will shut down after 15
once, press a second time to dim and again to shut off lights.
F
12
www.zephyronline.com
Lights On/Dim/Off
15 Min Delay Off
to increase speed levels. The display indicates levels
reminding you to clean the metal filters from residue and
once, a