Control Menu - InFocus IN5555L User Manual

Control menu

Eco Network Power: When this feature is set to Standard, Projector Control is
set to RS232 and all network functions continue to work when the projector is in
standby (powered off but connected to AC Power). When this feature is set to Eco,
network functions will not work when the projector is in standby.
Auto Power Off: When this feature is on, the projector is automatically turned
off after no signals are detected for 20 minutes. If an active signal is received
before the projector powers down, the image will be displayed.
Auto Power On: When this feature is on, the projector automatically turns on
when electrical power is connected. This allows control of ceiling mounted
projectors with a wall power switch.
Projector Control: Allows you to choose between RS232 and LAN projector
control methods.
Network: Press Enter button to review the current network settings. Note:
Network configuration and operation are made via the LAN Configuration Utility.
Start Up Logo: When this feature is on, the projector will display the InFocus
logo upon start-up.
Trigger: If you enable this feature and connect your projection screen to this
output using the cable that came with your screen, the screen will move down
when the lamp is turned on and the screen will return to its storage position, when
the lamp is turned off.
Auto Search: When this feature is on, the projector automatically finds the
active source. To display another source, you must manually select one by pressing
the Input button on the remote or keypad.
Dynamic Black: Turn this feature on when watching motion video in order to
improve the contrast of darker scenes.
Language: Allows you to select a language for the onscreen menu.
INPUT
28
PICTURE LAMPS ALIGNMENT CONTROL SERVICE
Eco Network Power < Standard >
Auto Power Off < Off >
Auto Power On < Off >
Projector Control < Network >
Network Enter
Start Up Logo < On >
Trigger < Auto >
Auto Search < Off >
Dynamic Black < Off >
Language Enter
Control menu