8. USING THE ON SCREEN DISPLAY (OSD) MENU
The multilingual On Screen Display (OSD) menus can be used to setup and adjust the projector.
1. Press the
button on the projector keypad or the Menu button on the remote control.
2. When the menu appears, use the
3. Press the
button on the projector keypad or the Enter button on the remote control to open a submenu.
4. Use the
keys to select an item in a submenu and the
5. Adjust the settings by using the
6. Press the
or Enter button to select a setting.
7. To close the OSD menu, press the
The menu will close and the projector will automatically save the new settings.
The OSD menus are listed in the "On Screen Display (OSD) Menu Tree" section.
keys to select an item.
or Enter button to view additional settings.
keys.
or Menu button.
36