Table of Contents
Advertisement
Replacing and adjusting the bottom transport belts
Fitting new transport belts
Important: When fitting new transport belts, observe the arrow marks: the
arrows must point in direction of rotation.
Figure 30: Fitting the lower transport belts
(1) - Sprockets
(2) - Bottom transport belts
(3) - Base plate cut-out
Adjusting steps
1. Pull the right transport belt over the right sprocket (1).
2. Route the transport belt down through the base plate cut-out (3).
3. Pull the transport belt over the lower sprocket (5).
4. Repeat steps 1 – 3 for the left transport belt.
Service Instructions 650-16 Version 00.0 - Last Updated 09/2012
(4) - Fastening screws
(5) - Bottom pulley
(6) - Mounting brackets
40
Advertisement
Table of Contents
