Order Of Settings; Cable Routing; Bolts In Safety Covers - Duerkopp Adler 650-16 Service Instructions Manual

Work principles

4.2 Order of settings

Always observe the stated order for the individual setting steps.
Observe order
Always observe all notes marked with a
and follow-up settings.

4.3 Cable routing

Make sure that all cables are routed in the machine that they do not inter-
Bundle cables
fere with the function of moving parts.
1. Lay over length cables in tidy loops.
2. Tie up loops with cable ties.
3. Cut off protruding cable ties.

4.4 Bolts in safety covers

There is no need to fully remove bolts in safety cover from their holes. As
soon as the bolts have been loosened sufficiently for you to remove the
cover, you can remove the cover. The bolts either stay in the housing or
in the cover. In the text, these bolts are marked with the supplement (safety
cover).
Service Instructions 650-16 Version 00.0 - Last Updated 09/2012
Attention
Damage to machine possible due to incorrect order.
Always keep to the work order stated in this guide.
Attach loops to stationary parts where possible. The cables must be
fixed in place.
Attention
Machine damage and functional impairment possible due to incor-
rect cable routing.
Excess cable can impair the function of moving machine parts. This im-
pairs the sewing function and can cause damage.
Route excess cable as described above.
in the margin on preconditions
9