Egtp Configuration - Cisco ASR 5000 Series Administration Manual

Serving Gateway Configuration
Creating an S-GW Service
Use the following configuration example to create the S-GW service in the ingress context:

eGTP Configuration

Step 1
Set the system's role as an eGTP S-GW and configure eGTP service settings by applying the example configuration in
the Setting the Systems Role as an eGTP S-GW and Configuring GTP-U and eGTP Service Settings
Step 2
Configure the S-GW service by applying the example configuration in the
Step 3
Specify an IP route to the eGTP Serving Gateway by applying the example configuration in the
Route section.
Setting the System's Role as an eGTP S-GW and Configuring GTP-U and eGTP Service Settings
Use the following configuration example to set the system to perform as an eGTP S-GW and configure the GTP-U and
eGTP services:
OL-22986-01
Configuring the System as a Standalone eGTP S-GW ▀
Configuring the S-GW Service
Cisco ASR 5000 Series Serving Gateway Administration Guide ▄
section.
section.
Configuring an IP