Control Panel; Restoring The Factory Settings; Standby - Hotpoint SX 1038L PX Operating Instructions Manual

6. During cooking it is always possible to:
GB
- change the temperature by pressing the
button, followed by the
modes only );
- set the duration of a cooking mode ( see Cooking
Modes );
- press the button to stop cooking. In this case
the appliance stores the temperature modified
previously in its memory ( manual modes only );
- switch off the oven by pressing the
seconds.
7. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance
will reactivate the cooking mode from the point at
which it was interrupted, provided that the
temperature has not dropped below a certain level.
Programmed cooking modes which have not yet
started will not be restored and must be
reprogrammed (for example: a cooking mode has
been programmed to start at 20:30. At 19:30 a
blackout occurs. When the power supply is restored,
the mode will have to be reprogrammed).
! There is no preheating stage for the GRILL mode.
! Never put objects directly on the bottom of the
oven; this will prevent the enamel coating from being
damaged.
! Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between the
control panel and the oven door, as well as towards
the bottom of the oven door.
! Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
sufficiently.
Oven light
The light comes on when the oven door is opened or
when a cooking mode starts.
When models featuring LED INSIDE technology
begin cooking, the LEDs on the door light up for
improved illumination of all cooking levels.
The button can be used to switch on the light at
any time.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
6
+ -
and buttons ( manual
button for 3
Residual heat indicators
The appliance is fitted with a residual heat indicator.
When the oven is off, the "residual heat" bar on the
display lights up to indicate high temperatures
inside the oven cavity. The individual segments of
the bar switch off one by one as the temperature
inside the oven falls.
Demo mode
The oven can operate in the DEMO mode: all heating
elements are deactivated, and the controls remain
operative.
To activate DEMO mode, press and release button
+
, then buttons and
seconds, and then press and release button
buzzer sounds and the TEMPERATURE display
shows "dEon".
To deactivate DEMO mode, when the oven is off
press and hold button
simultaneously for 3 seconds. A buzzer sounds and
the "dEoF" message disappears from the display.

Restoring the factory settings

The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven,
then press and hold the button corresponding to the
first manual cooking mode (top left) and the
button simultaneously for 6 seconds. Once the
restore procedure is complete, a buzzer will sound.
The first time the button is pressed, the oven will
behave as if it is being switched on for the first time.

Standby

This product complies with the requirements of the
latest European Directive on the limitation of power
consumption of the standby mode. If no buttons are
pressed for 30 minutes and the control panel/door
lock has not been activated, the appliance
automatically reverts to standby mode. Standby
mode is indicated by the high luminosity "Clock
button" light. As soon as interaction with the machine
resumes, the system's operating mode is restored.
-
simultaneously for 6
. A
-
and button