Start-up and use, 5-7 Switching the oven on for the first time Setings menu commands Control panel/door lock Setting the clock Setting the minute minder SX 1046Q PX Starting the oven SX 1046L PX DEMO mode Restoring the factory settings Standby...
Installation ! Please keep this instruction booklet in a safe place Ventilation for future reference. If the appliance is sold, given away or moved, please make sure the booklet is To ensure adequate ventilation is provided, the back also passed on to the new owners so that they may panel of the cabinet must be removed.
Electrical connection Power cable supply connection to the electrical mains: The electrical connection to the mains must be made on the appliance. The power voltage and frequency We recommend you use a power supply cable which are as indicated on the rating plate. is long enough to allow you to take the oven out of its recess in the event of maintenance operations ! THIS APPLIANCE MUST BE EARTHED.
Description of the appliance Overall view GUIDES for the Control panel sliding racks position 5 GRILL position 4 position 3 DRIPPING PAN position 2 position 1 Control panel Display DOOR / SETTINGS MANUAL TEMPERATURE icon CONTROL PANEL LOCK icon COOKING MODES icon icon CONTROL PANEL...
Start-up and use ! The first time you use your appliance, heat the commands. empty oven with its door closed at its maximum To modify the setting, press the icon. temperature for at least half an hour. Make sure that The following parameters are listed in the menu: the room is well ventilated before switching the oven LANGUAGE: select the language shown on the...
duration may be set. icon, then press and follow the steps described. Press the icon to select the desired automatic 1. Scroll through the menu commands using the cooking mode. The cooking temperature and control dial, select CLOCK and press duration are both set to default values.
! Once cooking has been completed, the cooling fan Restoring the factory settings continues to operate until the oven has cooled down The oven factory settings can be restored to reset all sufficiently. selections made by the user (language, tone, customised durations, etc…).
Modes ! Every time the oven is switched on, it suggests the ROAST mode first manual cooking mode. The top and circular heating elements switch on and the ! If the door is not shut properly, the text “DOOR fan begins to operate. This combination of features OPEN”...
• as the cooking temperatures are very low (in general Rotisserie spit* they are lower than the temperature required for evaporation), the dispersion of cooking sauces due To operate the to evaporation is substantially reduced and the food rotisserie function (see becomes softer;...
Page 10
• Remember to pour 50 g (0,5 dl) of cold CHICKEN mode water into the baking tray in position 5. This function is ideal for cooking chicken (whole or in • The dough must be left to rise at room temperature pieces).
Page 11
• Position: Use this function to make pizza (thin dough). Use - the deep dripping pan on shelf level 1 (if the firebrick pizza stone supplied, positioning it on supplied as an accessory), or place the rack on the rack in shelf position 6. The PIZZA WITH STONE shelf level 1 and stand a dish measuring mode guides the user through the cooking process approximately 35x30cm (height 5 cm) on it;...
Programming cooking 5. The text “POSTPONED COOKING START” and the time remaining will appear on the display, moving ! A cooking mode must be selected before the delayed start bar backwards. programming can take place. 6. Once cooking has begun, the display will indicate the remaining time by filling the duration bar.
Cooking advice table Modes Foods Weight Rack position Preheating Recommended Cooking (in kg) Temperature duration (°C) (minutes) Standard Sliding Manual guide rails guide rails Multilevel* Pizza on 2 racks 2 and 4 1 and 3 220-230 20-25 2 and 4 1 and 3 30-35 Pies on two racks/cakes on 2 racks...
Page 14
Modes Foods Weight Rack position Preheating (in kg) Standard Sliding Automatic** guide rails guide rails Bread*** Bread (see recipe) 2 or 3 Beef Roast beef 1-1,5 2 or 3 Veal Roast veal 1-1,5 2 or 3 Lamb Leg of lamb 1-1,5 2 or 3 Pork...
Precautions and tips ! This appliance has been designed and (including children) with reduced physical, manufactured in compliance with international safety sensory or mental capacities, by inexperienced standards. The following warnings are provided for individuals or by anyone who is not familiar with safety reasons and must be read carefully.
Care and maintenance Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Cleaning the appliance • Slight differences in colour on the front of the oven are due to the different materials used, i.e. glass, 3.
Page 17
2. Choose which shelf 3. Scroll through the menu commands using the Left Right guide to use with the sliding guide rail rail control dial, select PYROLYTIC and press rack. Paying attention 4. The appliance suggests a “NORMAL” pyrolytic to the direction in which cycle, with a duration of 1 hour 30 minutes.
Page 18
To cancel a schedule, press the icon. Once the automatic cleaning cycle is over Before you can open the oven door, you will have to wait for the icon to switch off: this indicates the oven temperature has dropped to an acceptable level.
Troubleshooting Problem Possible cause Solution A programmed cooking mode There has been a blackout. Reprogram the cooking mode. does not start. The display shows ECO Mode. The appliance is in standby Press any button to exit standby mode. mode. An automatic mode has been The temperature inside the oven Wait for the oven to cool down.
After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.
5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
Page 22
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24...
Page 23
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24...
Page 24
06/2011 - 195087022.01 XEROX FABRIANO PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24...
Need help?
Do you have a question about the SX 1046Q PX and is the answer not in the manual?
Questions and answers