Hotpoint SX 1046L PX S Operating Instructions Manual
Hotpoint SX 1046L PX S Operating Instructions Manual

Hotpoint SX 1046L PX S Operating Instructions Manual

Hide thumbs Also See for SX 1046L PX S:

Advertisement

Quick Links

SX 1046L PX S
SX 1046S L PX
English
Operating Instructions
OVEN
Contents
Operating Instructions,1

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint SX 1046L PX S

  • Page 1: Table Of Contents

    SX 1046L PX S SX 1046S L PX English Operating Instructions OVEN Contents Operating Instructions,1 Warnings,2 Description of the appliance,3 Installation,5 Electrical Connection,6 Start-up and use,7 Modes,9 Precautions and tips,15 Maintenance and care,15 Troubleshooting,18 After Sales Service,19 Guarantee,20...
  • Page 2: Warnings

    Warnings ! When you place the rack inside, make sure that the stop is directed upwards and WARNING: The appliance and its in the back of the cavity. accessible parts become hot during use. Care should be taken to avoid touching heating elements.
  • Page 3: Description Of The Appliance

    Description of the appliance Overall view 1. POSITION 1 2. POSITION 2 3. POSITION 3 4. POSITION 4 5. POSITION 5 6. GUIDES for the sliding racks 7. DRIPPING PAN 8. GRILL 9. Control panel Control panel 10. CONTROL PANEL POWER BUTTON 11.
  • Page 4: Position

    Display in programming mode Display in cooking mode 22. Cooking mode number indicator 30. Animated cooking icon 23. Selected menu indicator 31. Selected menu indicator 24. Temperature indicator 32. Suggests a course of action or displays the activity 25. COOKING DURATION indicator currently being performed by the oven 26.
  • Page 5: Installation

    Installation Ventilation To ensure adequate ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven ! Please keep this instruction booklet in a safe place for so that it rests on two strips of wood, or on a completely future reference.
  • Page 6: Electrical Connection

    Electrical Connection Unplug the appliance before all operations, even when replacing the oven lamp. The electrical connection to the mains must be made on Using the appliance without correct earthing is highly the appliance. The power voltage and frequency are as dangerous.
  • Page 7: Start-Up And Use

    Start-up and use ! After choosing the language in the menu, if the display is not used for another 30 seconds it will automatically revert WARNING! The oven is to programming mode. provided with a stop system to extract the racks and Setings menu commands prevent them from coming To enter the settings menu, switch on the control panel and...
  • Page 8: Setting The Clock

    Setting the clock 4. The oven will begin its preheating phase, the preheating indicators will light up as the temperature rises. To set the clock, switch on the oven by pressing the icon, 5. When the preheating process has finished, a buzzer sounds and all the preheating indicator lights show that this then press and follow the steps described.
  • Page 9: Modes

    To activate DEMO mode, switch off the oven and keep MULTILEVEL mode the control dial turned clockwise while pressing for 10 All heating elements and the fan are activated. Since the seconds. A buzzer sounds and the display shows “DEMO”. heat remains constant throughout the oven, the air cooks and To deactivate DEMO mode, keep the control dial turned browns food in a uniform manner.
  • Page 10: Automatic Cooking Modes

    PASTEURISATION mode Rotisserie spit* This cooking mode is suitable for fruit, vegetables, etc... Small containers may be positioned on 2 levels (dripping To operate the rotisserie pan on the 1st shelf and rack on the 3rd shelf). Let the function (see diagram) containers cool inside the oven.
  • Page 11 Method: SHORTCRUST TARTS mode • Mix the flour and salt in a large bowl. This function is ideal for all recipes which require shortcrust • Dilute the yeast in lukewarm water (approximately 35 pastry (usually made without eggs) or have a liquid or very degrees). soft filling. Place the food inside the oven while it is still cold. • Make a small well in the mound of flour. The dish may also be placed in a preheated oven.
  • Page 12: Position 2

    PILAU RICE mode Use this function to cook rice. To obtain the best results, we recommend that you observe the instructions below: • The rice used must not be sticky: salad rice or American Current time Cooking long-grain rice are particularly suitable. indicator of cooking time duration • The oven must not be preheated. Duration • The deep dripping pan should be on shelf level 2 (if Programming delayed cooking supplied as an accessory), or the rack placed on shelf...
  • Page 13: Cooking Advice Table

    GRILL • Place the rack in position 3 or 4. Position the food in the centre of the rack. • We recommend that the temperature is set to its maximum level. The top heating element is regulated by a thermostat and may not always operate constantly. PIZZA • Use a lightweight aluminium pizza pan. Place it on the rack provided. For a crispy crust, do not use the dripping pan as this extends the total cooking duration and prevents the crust from forming.
  • Page 14 Cooking advice table Modes Foods Weight Rack position Preheating (in kg) Standard Sliding Automatic* guide rails guide rails Bread** Bread (see recipe) 2 or 3 Beef Roast beef 1-1,5 2 or 3 Veal 1-1,5 Roast veal 2 or 3 Lamb Leg of lamb 1-1,5 2 or 3...
  • Page 15: Precautions And Tips

    Precautions and tips Disposal • When disposing of packaging material: observe local legislation so that the packaging may be reused. ! This appliance has been designed and manufactured • The European Directive 2012/19/EC on Waste in compliance with international safety standards. The Electrical and Electronic Equipment (WEEE), requires following warnings are provided for safety reasons and that old household electrical appliances must not...
  • Page 16: Cleaning The Oven Door

    Use specialised products for the removal of stubborn stains. After cleaning, rinse and dry thoroughly. Do not 2. Lift the pull-out hooks located use abrasive powders or corrosive substances. on the two hinges. If you cannot • The inside of the oven should ideally be cleaned after lift them manually, use a tool as each use, while it is still lukewarm.
  • Page 17: Replacing The Light Bulb

    Inspecting the seals Automatic cleaning by PYROLYSIS Check the door seals around the oven regularly. If the seals The cleaning cycle can cause the internal temperature of are damaged, please contact your nearest Service Centre the oven to reach 500°C. The pyrolytic cycle is activated, (see Assistance).
  • Page 18: Troubleshooting

    more quickly and make the setting process easier. The Once the automatic cleaning cycle is over display will show a graphic indicating the delayed start in Before you can open the oven door, you will have to wait for bar format. icon to switch off: this indicates the oven temperature 3.
  • Page 19: After Sales Service

    After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.
  • Page 20: Guarantee

    5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.

This manual is also suitable for:

Sx 1046s l px

Table of Contents