Inserting Tape Cartridges Into The Load Port - HP ESL E-Series User Manual

Inserting tape cartridges into the load port

Tape cartridges are inserted into either an 18-cartridge magazine for Ultrium, or a
16-cartridge magazine for SDLT as shown in
To insert a tape cartridge into a magazine:
1. Prepare the tape cartridges to be inserted by affixing a bar code label and
2. With the load port door open, place the tape cartridges in any available load
3. Manually close the load port door by pushing the load port assembly into the
ESL E-Series Tape Library User's Guide
write-protecting or write-enabling each cartridge as desired.
For more information about these procedures, refer to
cartridges" on page 55.
magazine slot.
The proper orientation for tape cartridge insertion is shown in
tape cartridges" on page 23 and
cabinet. You will hear a click when it locks into position.
Figure 6 on page 27.
"SDLT 320 tape cartridges" on page 25.
Library Operations
"Inserting tape
"Ultrium 460
73