Transmission / Receiving Protocol - HP LD4200 User Manual

25. Tile ID Set
26. Natural Mode (In Tile mode)
27. Elapsed time return
28. Temperature value
29. Lamp fault check
30. Auto Volume
31. Speaker
32. Time
33. On Timer (On/Off Timer) On, Off
34. Off Timer (On/Off Timer) On, Off
35. On Timer (On/Off Timer) Time
36. Off Timer (On/Off Timer) Time
37. Sleep Time
38. Auto Sleep
39. Power On Delay
40. Language
41. DPM Select
42. Reset
43. S/W Version
44. Input Select

Transmission / Receiving Protocol

Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*[Command 1]: First command. (k)
*[Command 2]: Second command.(a ~ u)
*[Set ID]: Set up the Set ID number of product.
range : 01H~63H. by setting '00H', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be
checked the ack message.
Because all sets will send the ack message, so it's impossible the check the whole ack messages.
*[DATA]: To transmit command data.
ENWW
COMMAND1 COMMAND2
d i
d j
d l
d n
d p
d u
d v
f a
f b
f c
f d
f e
f f
f g
f h
f i
f j
f k
f z
x b
DATA1 DATA2
00H -19H
00H -01H
FFH
FFH
FFH
00H -01H
00H -01H
00H -06H 00H - 17H
00H, FFH
00H, FFH
00H -07H 00H - 17H
00H -07H 00H - 17H
00H -08H
00H -01H
00H -64H
00H -09H
00H -01H
00H -02H
FFH
20H -A0H
Transmission / Receiving Protocol
DATA3
0 - 3BH
00 - 3BH
00 - 3BH
43