Something Wrong With Your Cooker - Hotpoint CH60GPCF Use And Installation Instructions

Hotpoint cookers use and installation instructions
Table of Contents

Advertisement

WITH YOUR COOKER
Before contacting your nearest Service Centre/Installer, check the problem guide below; there may be nothing
wrong with your cooker.
PROBLEM
Burner will not light:
Grill burner:
Burner ports
Hotplate burner:
Burner ports
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
32
SOMETHING WRONG
Ignitor
Ignitor
CHECK
If all burners fail to ignite:
Check that sparks appear at the burners; a clicking noise should
be heard.
If not;
Check that the electricity supply is turned on.
If the electricity supply has failed, you can only use the hotplate
burners, which can be lit by a match.- DO NOT USE THE GRILL
OR OVEN(S) WITHOUT AN ELECTRICAL SUPPLY BEING CON-
NECTED TO THE COOKER
If only one burner fails to ignite:
Check that the burner is dry and that spillage of food or cleaning
fluid remains are not affecting the ignitor or burner ports.
Clean away any debris with a dry nylon brush such as an old
toothbrush. If a wire wool pad has been used for cleaning around
the burner ensure the ignitor is free from any stray strands. Any
water on the burner should be dried with a cloth or kitchen towel.
Make sure that all the burners parts are correctly seated.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ch60gpxf

Table of Contents