Page 1
HF4167 FOLD - UP FLAT TO INCLINE BENCH Note: Both Serial Number and Model Number are Required when Ordering Parts Note: Both Serial Number and Model Number are Required when Ordering Parts Note: Both Serial Number and Model Number are Required when Ordering Parts...
Be sure to have your serial number and this manual when calling. When all parts have been accounted for, continue on. TOOLS REQUIRED Socket Wrench 1/2", 9/16" and 3/4" Sockets Crescent Wrench Rubber Mallet Tape Measure Level PAGE 02 HF4167 ASSEMBLY...
CENTERED ON TUBE CENTERED ON TUBE 026-01X2215 BASE FRAME ASSEMBLY 7.00 SERIAL # DECAL CENTERED ON TUBE 021-0003113 CENTERED ON TUBE 026-01X2229 BACK PAD SUPPORT ASSEMBLY 1.50 021-0003222 CENTERED ON TUBE 026-01X2211 FRONT FOOT ASSEMBLY 12.00 PAGE 21 HF4167 ASSEMBLY...
Page 23
DECAL PLACEMENT 021-0003230 CENTERED ON TUBE 026-01X2207 LINK ASSEMBLY 8.00 021-0003269 CENTERED ON TUBE 026-01X2203 1.13 ADJUSTER ASSEMBLY 021-0003228 CENTERED ON TUBE 2.75 021-0003135 CENTERED ON TUBE 021-0003008 CENTERED ON TUBE 2.00 9.25 026-01X2205 BACKPAD MOUNT ASSEMBLY HF4167 ASSEMBLY PAGE 22...
Hoist Fitness Systems warrants this product to the original purchaser to be free from defects in workmanship and/or materials under normal use or service. If at any time a component part is defective, Hoist Fitness Systems shall repair or replace it (at Hoist Fitness Systems option) within a reasonable period of time. This warranty does not cover costs of removal.