Balancer (Mt Inverter) Board Removal (Kdl-32L5000 Only) - Sony KDL-26L5000; KDL-32L5000 Service Manual

1-9. BALANCER (MT INVERTER) BOARD REMOVAL (KDL-32L5000 ONLY)

1 Remove 5 screws from Board cover
2 Pull out the Board from Lamp socket
2
Balancer Board
KDL-26L5000/32L5000
LCD Panel
1
Cover
REMOVE SCREWS
SECURING SHIELD
END VIEW
SOCKET
DO NOT
REMOVE
BACKLIGHT
SCREWS
Plastic Strip
holding
Lamp Socket
INVERTER BOARD REMOVAL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
BACKLIGHT
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement. The example shown
is a 32" model but applies to all models.
KDL-26L5000/32L5000
2
Inverter Board
REMOVE SCREWS
SECURING SHIELD
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
19