Balancer (Mt Inverter) Board Removal (Kdl-26L5000 Only) - Sony KDL-26L5000; KDL-32L5000 Service Manual

1-8. BALANCER (MT INVERTER) BOARD REMOVAL (KDL-26L5000 ONLY)

1 Remove 6 screws from Board cover
2 Pull out the Board from Lamp socket
KDL-26L5000/32L5000
2
Balancer Board
REMOVE SCREWS
SECURING SHIELD
LCD Panel
1
Cover
Only remove the screws securing the inverter
cover which may be metal or plastic. The
END VIEW
remaining plastic strip contains sockets for the
BACKLIGHT
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement. The example shown
is a 32" model but applies to all models.
SOCKET
KDL-26L5000/32L5000
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
INVERTER BOARD REMOVAL
18