Balancer (Etc-Inverter Mt) Board Removal - Sony KDL-52V4100 Service Manual

1-10. BALANCER (ETC-INVERTER MT) BOARD REMOVAL

1
Remove 7 screws from each Inverter Cover
2
Pull out the Balancer board from the Lamp Socket.
Balancer Board
KDL-52V4100/52W4100
LCD Panel
1
Shield
SCREWS SECURING THE
PLASTIC STRIP HOLDING
BACKLIGHT TUBES WILL
REMOVE SCREWS
SECURING
SHIELD
SHIELD REMOVAL
1
WARNING !
NEVER REMOVE THE
THE LAMP SOCKETS
DAMAGE TO THE .
OCCUR!
END VIEW
BACKLIGHT
SOCKET
2
REMOVE
CONNECTORS AND
PULL BOARDS TO
THE RIGHT
BALANCER (ETC-INVERTER) BOARD REMOVAL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement.
KDL-52V4100/52W4100
18