Balancer (Mt Inverter) Board Removal (Kdl-32L4000 Only) - Sony KDL-32L4000 Service Manual

1-11. BALANCER (MT INVERTER) BOARD REMOVAL (KDL-32L4000 ONLY)

1
Remove 5 screws from Board Cover.
2
Pull out the Board from Lamp socket
Balancer Board
KDL-32L4000/37L4000
Inverter Cover
REMOVE SCREWS
SECURING
SHIELD
SHIELD REMOVAL
DO NOT
REMOVE
BACKLIGHT
SCREWS
1
WARNING !
NEVER REMOVE THE
SCREWS SECURING THE
PLASTIC STRIP HOLDING
THE LAMP SOCKETS
DAMAGE TO THE
.
BACKLIGHT TUBES WILL
OCCUR!
END VIEW
BACKLIGHT
SOCKET
KDL-32L4000/37L4000
2
Plastic Strip
Inverter Board
holding
Lamp Socket
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
INVERTER BOARD REMOVAL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement. The example shown
is a 32" model but applies to all models.
18