1-9. BALANCER (ETC-INVERTER) MT BOARD REMOVAL
1
Remove 6 screws from board cover
2
Remove 1 screw
3
Slide out Inverter Board from Light Sockets
2
Balancer Board
REMOVE SCREWS
SECURING
SHIELD
KDL-40Z4100/B//40Z4100/S//46Z4100/B//46Z4100/S
LCD Panel
1
Cover
SHIELD REMOVAL
Light Sockets
END VIEW
SOCKET
KDL-40Z4100/B//40Z4100/S//46Z4100/B//46Z4100/S
3
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
BALANCER (ETC-INVERTER) BOARD REMOVAL
Only remove the screws securing the inverter
cover which may be metal or plastic.
The sockets for the fluorescent backlights should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement.
17