Table of Contents
Advertisement
NEC Express5800/120Rf-1,120Rh-2 Operation Manual for Microsoft®Windows Server™ 2003 x64 Editions
Troubleshooting
When the Express5800 series does not operate as expected, check the system according
to the check list given below before asking to repair.
If one of the symptoms in the list is observed, perform checking and take action as indicated
subsequently.
If the system still does not operate normally, record the messages displayed on the screen,
and contact the maintenance service company.
The symptoms listed in the following troubleshooting are those newly observed in the
Windows Server 2003 x64 Editions. For the other symptoms, refer to the User's Guide.
When the Windows Server 2003 x64 Editions have been installed, the following
?
event log may be recorded:
Source:
Type:
Event ID:
Explanation:
→ This causes no system operation problem.
When the Windows Server 2003 x64 Editions have been installed, the following
?
event log may be recorded:
Source:
Type:
Event ID:
Explanation:
→ This causes no system operation problem.
LoadPerf
Error
3009
The character string of the performance counter of service
C:\WINDOWS\syswow64\ipsecprf.ini
(C:\WINDOWS\syswow64\ipsecprf.ini)
installed.
The error code is the first DWORD in the data section.
DCOM
Error
10016
According to the default authority setting in the computer,
the access permission for performing local activation of a
COM server application having CLSID
{555F3418-D99E-4E51-800A-6E89CFD8B1D7} cannot be
given to user NT AUTHORITY\LOCAL SERVICE SID
(S-1-5-19). This security access permission can be
changed by using the component service management
tool.
20
could
not
be
Advertisement
Table of Contents
