NEC Express5800/120Rf-1,120Rh-2 Operation Manual for Microsoft®Windows Server™ 2003 x64 Editions
Preparation for Installing the Windows Server 2003 x64 Editions
Items Required for Installation
Before starting to install the Windows Server 2003 x64 Editions, check that the
following media and manuals have been prepared:
NEC difference module for the Windows Server 2003 x64 Edition for the
Express5800/120Rf-1 and 120Rh-2
(hereinafter Called the NEC difference module)
Visit NEC Express5800 Web Site
called the download site), and acquire the module.
Windows Server 2003 x64 Edition OEM-DISK for EXPRESSBUILDER
(or one 3.5-inch floppy disk in the 1.44MB format)
For the creation procedure, see "Creating the Windows Server 2003 x64 Edition
OEM-DISK for EXPRESSBUILDER".
NEC Express5800/120Rf-1, 120Rh-2 Operation manual For Microsoft®
Windows Server™ 2003, Standard x64 Edition/Microsoft® Windows
Server™ 2003, Enterprise x64 Edition (this manual)
Microsoft® Windows Server™ 2003, Standard x64 Edition/
Microsoft® Windows Server™ 2003, Enterprise x64 Edition (CD-ROM)
* To be purchased separately.
(hereinafter called the Windows Server 2003 x64 Edition CD-ROM)
or Backup CD-ROM Microsoft Windows Server 2003, Standard x64
Edition/Backup CD-ROM Microsoft Windows Server 2003, Enterprise x64
Edition (hereinafter called the backup CD-ROM)
EXPRESSBUILDER CD-ROM
User's Guide (See the "Online Document" from the master control menu of the
EXPRESSBUILDER CD-ROM.)
The above are supplied when the Express5800 series is purchased:
Downloading the NEC Difference Module
Before creating the Windows Server 2003 x64 Edition OEM-DISK for
EXPRESSBUILDER or updating the system, download the NEC difference module
for the Express5800/120Rf-1 and 120Rh-2 by following the steps below.
(1) Visit the Download site and download the NEC difference module
supporting the Express5800/120Rf-1 and 120Rh-2.
(2) After downloading the module, store it in any folder on the hard disk drive.
(Example: C:\TEMP)
NOTE
The name of the download destination folder must not
contain blank characters.
(http://www.nec.co.jp/express/)
3
(hereinafter
Need help?
Do you have a question about the Express5800/120Rf-1 and is the answer not in the manual?