TP-Link JetStream TL-SL3452 Installation Manual page 23

L2 managed switch

Hide thumbs Also See for JetStream TL-SL3452:

Table of Contents

The Connection Description Window will prompt as Figure 5-5. Enter a name into the

Name field and click OK.

Select the port to connect in Figure 5-6, and click OK.

Figure 5-6

Configure the port selected in the step above as the following Figure 5-7 shown.

Configure Bits per second as 38400, Data bits as 8, Parity as None, Stop bits as 1,

Flow control as None, and then click OK.

Figure 5-5

Connection Description

Select the port to connect

L2 Managed Switch

Configuration

Table of Contents

Jetstream tl-sl3428