L2 Managed Switch
411
Configure the Switch Using CLI
17
Configuration
Figure 5-3
You can log on to the Switch and access the CLI by the following two methods:
Log on to the Switch by the console port on the Switch.
■
Log on to the Switch remotely by a Telnet or SSH connection through an Ethernet
■
port.
Logon by a Console Port
■
To log on to the switch by the console port on the Switch, please take the following
steps:
1.
Connect the PCs or Terminals to the console port on the Switch by a provided cable.
2.
Click Start
→All Programs→Accessories→Communications→Hyper Terminal to open
the Hyper Terminal as the following figure shown.
Main Page of the Switch
Figure 5-4
Open Hyper Terminal