Chapter 5 Configuration; Configure The Switch Via Gui - TP-Link JetStream TL-SL3452 Installation Manual

L2 managed switch

Hide thumbs Also See for JetStream TL-SL3452:

Table of Contents

ChaCter 4

Configuration

41C

To access the GUI of the Switch, open a web browser and type the default

management address http://192.168.0.1 in the address field of the browser, then

press the Enter key.

Note: To log on to the GUI of the Switch, the IP address of your PC should be set in

the same subnet addresses of the Switch. The IP address is 192.168.0.x ("x" is any

number from 2 to 2541, Subnet Mask is 255.255.255.0.

For the detailed instructions as to how to do this, please refer to Appendix B in the

User Guide on the Resource CD.

Enter admin for the default User Name and Password, both in lower case letters.

Then click the Login button or press the Enter key.

After a successful login, the main page will appear as the following figure, and you

can configure the function by clicking the setup menu on the left side of the screen.

Figure 5-1

Web Browser

Figure 5-2

L2 Managed Switch

Configuration

Table of Contents

Jetstream tl-sl3428