Snmp User - TP-Link TL-SG2008 User Manual

Notify View:
Group Table
Select:
Group Name:
Security Model:
Security Level:
Read View:
Write View:
Notify View:
Operation:
Note:
Every Group should contain a Read View. The default Read View is viewDefault.

11.1.4 SNMP User

The User in an SNMP Group can manage the switch via the management station software. The
User and its Group have the same security level and access right. You can configure the SNMP
User on this page.
Choose the menu SNMP→SNMP Config→SNMP User to load the following page.
The following entries are displayed on this screen:
Select the View to be the Notify View. The management station
can receive trap messages of the assigned SNMP view generated
by the switch's SNMP agent.
Select the desired entry to delete the corresponding group. It is
multi-optional.
Displays the Group Name here.
Displays the Security Model of the group.
Displays the Security Level of the group.
Displays the Read View name in the entry.
Displays the Write View name in the entry.
Displays the Notify View name in the entry.
Click the Edit button to modify the Views in the entry and click the
Modify button to apply.
Figure 11-6 SNMP User
122