TP-Link TL-SG2008 User Manual page 37

Click Edit to display the following figure.
The following entries are displayed on this screen:
Mirror Group
Number:
Mirroring Port
Mirroring Port:
Mirrored Port
Port Select:
Select:
Port:
Ingress:
Egress:
LAG:
Figure 5-3 Port Mirror Config
Select the mirror group number you want to configure.
Select the mirroring port number.
Click the Select button to quick-select the corresponding port based
on the port number you entered.
Select the desired port as a mirrored port. It is multi-optional.
Displays the port number.
Select Enable/Disable the Ingress feature. When the Ingress is
enabled, the incoming packets received by the mirrored port will be
copied to the mirroring port.
Select Enable/Disable the Egress feature. When the Egress is
enabled, the outgoing packets sent by the mirrored port will be
copied to the mirroring port.
Displays the LAG number which the port belongs to. The LAG
member can not be selected as the mirrored port or mirroring port.
30