TP-Link TL-SG2008 User Manual page 81

Configure Switch C:
Step Operation
1 Configure ports
2 Enable STP function
3 Configure the region name and
the revision of MST region
4 Configure
mapping table of the MST region
5 Configure switch C as the root
bridge of Instance 1
6 Configure switch C as the root
bridge of Instance 2
Configure Switch D:
Step Operation
1 Configure ports
2 Enable STP function
3 Configure the region name and
the revision of MST region
4 Configure
mapping table of the MST region
The configuration procedure for switch E and F is the same with that for switch D.
Description
On VLAN→802.1Q VLAN page, configure the link
type of the related ports as Tagged, and add the ports
to VLAN101-VLAN106. The detailed instructions can
be found in the section
On Spanning Tree→STP Config→STP Config
page, enable STP function and select MSTP version.
On Spanning Tree→STP Config→Port Config
page, enable MSTP function for the port.
On
Config page, configure the region as TP-LINK and
keep the default revision setting.
VLAN-to-Instance On Spanning Tree→MSTP Instance→Instance
Config page, configure VLAN-to-Instance mapping
table. Map VLAN101, 103 and 105 to Instance 1; map
VLAN102, 104 and 106 to Instance 2.
On Spanning Tree→MSTP Instance→Instance
Config page, configure the priority of Instance 1 to be
4096.
On Spanning Tree→MSTP Instance→Instance
Config page, configure the priority of Instance 2 to be
0.
Description
On VLAN→802.1Q VLAN page, configure the link
type of the related ports as Tagged, and add the ports
to VLAN101-VLAN106. The detailed instructions can
be found in the section
On Spanning Tree→STP Config→STP Config
page, enable STP function and select MSTP version.
On Spanning Tree→STP Config→Port Config
page, enable MSTP function for the port.
On
Config page, configure the region as TP-LINK and
keep the default revision setting.
VLAN-to-Instance On Spanning Tree→MSTP Instance→Instance
Config page, configure VLAN-to-Instance mapping
table. Map VLAN101, 103 and 105 to Instance 1; map
VLAN102, 104 and 106 to Instance 2.
802.1Q
Spanning Tree→MSTP
802.1Q
Spanning Tree→MSTP
74
VLAN.
Instance→Region
VLAN.
Instance→Region