Chapter 4. Preparing To Use The Combo Ii Drive - IBM USB 2.0 CD-RW/DVD-ROM Combo II Drive User Manual

Chapter 4. Preparing to use the Combo II Drive

Before using the Combo II Drive, follow the procedure below:
1. Make sure the Combo II Drive is properly connected to your ThinkPad
2. Check the locations of the functions on the Combo II Drive (refer to the figures
3. Insert the USB 2.0 CD-RW/DVD-ROM Combo II Drive Software and
4. Double-click on the application you want and follow the instructions on the
5. Check that the drive operates normally and keep the enclosed warranty in a
Following are the locations of the functions on the Combo II Drive:
Figure 4-1. Front view of the Combo II Drive
© Lenovo 2006. Portions © IBM Corp. 2004.
computer.
below).
User's Guide Super CD that was shipped with this option to install the
CD-R/CD-RW writing software or DVD read software.
screen.
safe place after filling it in.
1 Power/Busy indicator
The green LED indicates the power status and the operation
states of the drive.
v LED is on: during data read or seek
v LED blinks slowly: during data write
v LED blinks quickly: during disc recognition
v LED is off: when the drive is not being accessed (even
though it may be connected to your system)
4-1