Periodic maintenance and adjustment
To measure the drive sprocket wear
Measure the drive sprocket tooth width. If the
tooth width is less than 28 mm (1.10 in), re-
place the drive sprocket.
1
2
1. Drive sprocket tooth
2. Drive sprocket tooth width
ESU14290
Skis and ski runners
Checking the skis and ski runners
Check the skis and ski runners for wear and
damage. Replace if necessary.
ECS00560
NOTICE
Avoid scratching the skis when loading
and unloading the snowmobile, when
riding in areas with little or no snow, or on
sharp edges such as concrete, curbs, etc.
This will wear or damage the skis.
FX10/FX10RTRS/FX10XT
1. Ski runner wear limit
72
FX10M53S/FX10M62S
1
1
2
1. Ski wear limit
2. Ski runner
Ski runner wear limit:
8.0 mm (0.31 in)
Ski wear limit:
FX10 13.0 mm (0.51 in)
FX10RTRS 13.0 mm (0.51 in)
FX10XT 13.0 mm (0.51 in)
1. Ski runner wear limit
1