Storage Pouch - Yamaha FX10B Owner's Manual

The drive guard is located behind the left side
cover. (See page 52 for removal procedures.)
To remove the drive guard
1. Pull out the drive guard locking pin from
the drive guard rear holder.
1. Drive guard
2. Drive guard locking pin
2. Lift up the rear of the drive guard as
shown, and then pull the guard rearward
to remove it.
To install the drive guard
1. Fit the front slots in the drive guard over
the projections on the drive guard front
holder.
Control functions
1
1. Drive guard
2
2. Align the slots in the rear of the drive
guard with the projections on the drive
guard rear holder, and then insert the
drive guard locking pin into the holder as
shown.
2
1. Drive guard
2. Drive guard locking pin
ESU13044

Storage pouch

The storage pouch is located under the
shroud. (See page 52 for shroud removal pro-
cedures.) Use the storage pouch to store the
tool kit, manuals, spare parts, such as the V-
belt, or other small items.
1
1
19