Pre-Operation Checks; Pre-Operation Check List - Yamaha FX10B Owner's Manual

Table of Contents

ESU11071

Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition.

Always follow the inspection and maintenance procedures and schedules described in the

Owner's Manual.

EWS00191

WARNING

Failure to inspect or maintain the vehicle properly increases the possibility of an acci-

dent or equipment damage. Do not operate the vehicle if you find any problem. If a prob-

lem cannot be corrected by the procedures provided in this manual, have the vehicle

inspected by a Yamaha dealer.

ESU11081

Pre-operation check list

ITEM

Fuel

Engine oil

Coolant

V-belt

Drive guard

Brake

Air filter

Tool kit and recommended

equipment

Shroud and covers

Skis and ski runners

• Check fuel level.

• Refuel if necessary.

• Check fuel line for leakage.

• Check oil level in engine.

• If necessary, add recommended oil to specified

level.

• Check vehicle for oil leakage.

• Check coolant level.

• Add if necessary.

• Check for wear and damage.

• Replace if necessary.

• Make sure the drive guard is installed securely.

• Check the drive guard mounts for damage.

• Check operation.

• If soft or spongy, have Yamaha dealer bleed hy-

draulic system.

• Check brake pads for wear.

• Replace if necessary.

• Check fluid level in master cylinder.

• If necessary, add recommended brake fluid to

specified level.

• Check hydraulic system for leakage.

• Check that there is no snow under the air filter ele-

ment.

• If necessary, brush off the snow.

• Check for proper placement.

• Make sure that the shroud and covers are securely

fastened.

• Check for wear and damage.

• If necessary, have Yamaha dealer replace skis or

ski runners.